Version 0 (released 12/11/2017) new features, bug fixes, & other changes



Download 183.44 Kb.
Page1/7
Date05.05.2018
Size183.44 Kb.
#48137
  1   2   3   4   5   6   7
Version 8.1.0 - (released 12/11/2017)

NEW FEATURES, BUG FIXES, & OTHER CHANGES:

  • New action tag: @MAXCHOICE

    • Causes one or more specified choices to be disabled (i.e., displayed but not usable) for a checkbox, radio button, or drop-down field after a specified amount of records have been saved with that choice. For example, @MAXCHOICE(0=50,1=75,2=50) would imply that once 50 records have selected the '0' coded choice, that choice will become disabled for any record viewed afterward that does not have that choice saved, such as when the form/survey is opened for a new record, and thus 75 records for choice '1', 50 for choice '2', etc.

    • The format must be the action tag name followed by the choice designations inside parentheses, in which each will follow the format of ChoiceCode=MaxCount with each choice separated by commas. Note: For longitudinal projects, when counting the number of choices saved for records, it will treat all events as separate, meaning that in the example above, choice '0' can have a max number of 50 selections in EACH event in the project.

    • Note: This action tag not only gets employed when a form or survey is loaded but also when a form or survey is submitted in order to prevent users/respondents from going over the max amount specified. If a user submits a form/survey, at which point the maximum has been reached due to simultaneous users entering data just before them, it will not save that field’s value (but will save all the other fields on the form/survey), and it will reload the form/survey and tell the user to make another selection for the field.

  • New action tag: @MAXCHECKED - Allows a checkbox field to have a maximum number of checkboxes that can be checked. If other checkbox options are clicked after the maximum has been reached, those choices will not be able to be checked. The format must be @MAXCHECKED=#, in which # is a positive integer. For example, @MAXCHECKED=3 will allow a maximum of 3 checkbox choices to be checked. NOTE: This action tag can only be utilized by Checkbox fields, and it does not get enforced during data imports.

  • New feature: New option to allow respondents to return to a partially completed or fully completed survey response without needing a return code. When enabling "Save & Return Later" for a survey on the Survey Settings page, it will still default to requiring a return code in order for a respondent to continue the survey where they left off. But a user may opt to allow respondents to return to and continue their survey with only the survey link (i.e., without needing a return code in addition to the link) to view and modify their previous responses on that survey. Note: A warning exists in bold text in the informational popup for this feature that states the following: "If you are collecting identifying information (e.g., PII, PHI), for privacy reasons it is HIGHLY recommended that you leave the option unchecked so as to enforce a return code."

  • Change: For PDF exports of data entry forms with data, if a field that is normally removed from exports due to users having export rights of "De-Identified" or "Remove all tagged Identifier fields" is being used in the Custom Record Label or Secondary Unique Field value in the PDF file, that field value will no longer be piped in the PDF file but will instead be redacted (i.e., replaced with the text "[*DATA REMOVED*]"). This change is made to increase security/privacy regarding de-identification of data in data exports.

  • Bug fix: When clicking the "Erase all data" button on the Other Functionality page when utilizing surveys in a project, on some occasions it may mistakenly return an error message saying that it could not delete all data, even though it did successfully delete all project data.

  • Bug fix: REDCap Messenger would sometimes mistakenly open when navigating to a new page even though it was just closed, and sometimes it would close on a new page when it was just opened on the previous page.

  • Bug fix: If a user is on a data collection instrument that has been enabled as a survey, in which the record has not yet been created, if the "Save & Mark Survey as Complete" button is clicked on the data entry form, it would save the form but would mistakenly not set the survey as complete. (Ticket #31784)

  • Bug fix: If a user is on a data collection instrument that is a repeating instrument and has also been enabled as a survey, if the "Save & Mark Survey as Complete" button is clicked on the data entry form, it would save the form but would mistakenly not set the survey as complete for the correct repeat instance of the instrument.

  • Bug fix: If a project previously had repeating instruments or repeating events enabled, in which some repeating data was collected, after which repeating instruments/events was disabled, both the Record Status Dashboard and the left-hand project menu might mistakenly display an incorrect status icon (the "stack" status icon) for a non-repeating instrument/event.

  • Bug fix: When creating a project by importing the REDCap project XML file that was exported from another project, it would mistakenly remove all carriage returns/line breaks in field labels. (Ticket #31908)

Version 8.0.3 - (released 12/1/2017)

IMPROVEMENTS, BUG FIXES, & OTHER CHANGES:

  • Improvement: The datediff() function can now utilize the “now” variable as one of the two date/time parameters (in a similar way as the “today” variable). This is not only true for calc fields, but also for ASI logic, DQ rules, report filters, etc. You may use a time, date, datetime, or datetime_seconds field with the “now” parameter in datediff. Note: If using a date field with “now”, it will assume midnight (00:00) for the time component for the date field.

  • Improvement: Fields whose values have numbers with a comma as the decimal mark (e.g., "3,14" - European number format) now work in calculated fields. In previous versions, using a number with a comma would result in a blank returned value for the calc field. Note: The calculated value that is returned from a calculation will still have a dot/period as the decimal mark (if it contains a decimal), so in this way, it will convert into all calc field input values into dot/period format when performing the calculation, thus still returning numbers in dot/period format as all previous versions have.

  • Minor security fixes: Some Cross-Site Scripting (XSS) vulnerabilities were found in various pages in which a malicious user could potentially exploit them by manipulating the query string of an HTTP request.

  • Change: When piping field values into an @DEFAULT action tag when the piped value is blank/non-existent, it now no longer replaces the [variable] with "______" but instead replaces it with "" (i.e., nothing), which is viewed as more preferable since the value is being input as a field value. This is only true for piping specifically within the @DEFAULT tag and not for piping in general. (Ticket #23454)

  • Bug fix: The @HIDECHOICE action tag was mistakenly not hiding the choices of checkboxes or radio buttons on survey pages where the "enhanced radio buttons and checkboxes" option was enabled. It was only hiding them when the enhanced option was disabled. (Ticket #31001)

  • Bug fix: If a project in production status is in draft mode, and the Move Field icon is clicked for a field in the Online Designer in order to move a field, in which the field is the first field on a data collection instrument, then after being moved, the project's instruments might not display correctly in the Online Designer, such as making some fields not even viewable on any instrument in the Online Designer view. This issue would persist while still in draft mode, but would eventually resolve once the drafted changes were approved. Note: This issue would not affect how fields or instruments are displayed on data entry forms or survey pages when entering data.

  • Bug fix: If a user enters data on a repeating instrument but fails to enter a value for a required field, and then the user clicks the "Ignore and go to next form" button in the "Some fields are required" prompt, in which the next form is *not* a repeating instrument, then it would mistakenly take the user to the next form but on an incorrect instance, which may cause some data to not get stored properly on that second form. When clicking the "Ignore and go to next form" button, it should always take the user to instance #1 of the next form unless the user is currently on a repeating event. (Ticket #29801)

  • Bug fix: When uploading a data dictionary containing calc fields, it might mistakenly display an error stating that some equations are not syntactically correct, which is ultimately caused due to line break characters from Mac Excel (as opposed to Windows Excel line breaks).

  • Bug fix: When clicking the H icon next to a field to open the Data History Widget on a data entry form, it would mistakenly omit any logged events for "Update record (API) (Auto calculation)". (Ticket #31362)

  • Bug fix: When downloading a PDF of a data entry form, on specific occasions it may mistakenly crash and return an error message saying "FPDF error: Interlacing not supported...". (Ticket #31101)

  • Bug fix: When downloading the Project XML file (metadata or metadata+data file), it might mistakenly duplicate a checkbox field's choices numerous times in the metadata section of the ODM XML file. (Ticket #29287)

  • Bug fix: When assigning a user to a user role on the User Rights page in a project, if the user is using certain versions of Internet Explorer, the "Notify user via email?" checkbox would sometimes mistakenly not get displayed after clicking the "Assign to role" button. (Ticket #30764)

  • Change: The field validation for North American phone numbers is now more permissible and allows a greater variety of numbers to be used, such as 8XX and 900 numbers.

  • Bug fix: When the survey login is used in a longitudinal project, if three fields are set to be the login field, in which the same field is used but on different events or arms, although it would save the settings correctly, if the survey login popup was later reopened after being saved, the event/arm drop-down for the login field #3 would mistakenly have the event/arm value of login field #1. (Ticket #18430)

  • Change: When clicking the "No Access" option for an instrument in Data Entry Rights when adding/editing a user's privileges on the User Rights page, it now automatically deselects the "Edit survey responses" checkbox if the instrument has been enabled as a survey.

Version 8.0.2 - (released 11/17/2017)

BUG FIXES & OTHER CHANGES:

  • Minor security fix: A Cross-Site Scripting (XSS) vulnerability was found in a page used by various functionality dealing with user accounts, in which a malicious user could potentially exploit it by manipulating the query string of an HTTP request. (Ticket #30806)

  • Change: For added flexibility, the Survey Queue setup dialog in the Online Designer will now display the project's first data collection instrument (assuming the instrument has been enabled as a survey), whereas previous versions did not allow the first instrument to be enabled in the Survey Queue.

  • Change: When viewing a repeating instrument's data entry form for a record in a project, the "current instance" drop-down displayed near the top of the page no longer displays the instance number in a fraction format where it shows the total instances following by a slash (e.g., 2/5). It now only displays the instance number (and the custom label, if defined). This was changed because it led to confusion in cases where some instances were deleted, thus leaving gaps in the middle but still showing the max instance as the total instances, which is not the same thing and is confusing.

  • Bug fix: When a user is viewing the Data Export Files tab on the File Repository page in a project, and they set the "filter by" drop-down to Stata, R, SPSS, or SAS, then in the results displayed in the table below, the Data CSV file would mistakenly not be downloadable. (Ticket #30578)

  • Bug fix: When creating a new Data Quality rule that is attempting to find blank values (via [field]=""), if all the fields being referenced in the rule logic are blank/null for a given record, the rule would mistakenly not return any discrepancies for that record. (Ticket #30655)

  • Bug fix: When viewing the Configuration Check page in the Control Center, if the "mbstring" PHP Bug fix: In longitudinal projects that utilize the survey queue to display surveys across multiple events, the survey queue would mistakenly order the surveys by instrument order rather than by event order. This has been fixed so that it now orders surveys in the queue by event order so that all the surveys in a given event are grouped together. (Ticket #30704)

  • Bug fix: When a survey is enabled in the survey queue in a longitudinal project, and then that survey instrument is removed from a given event (via the Designate Instruments page), thus orphaning the survey-event in the survey queue, if no other survey-events are enabled in the survey queue, then the Survey Queue button in the Online Designer might mistakenly still have a green checkmark icon next to it, even though no survey-events are enabled in the queue anymore. Also, in this case the survey-event may mistakenly get displayed in a record’s survey queue when the survey is no longer designated for that event.

  • Bug fix: When the survey login is used in a longitudinal project, if multiple fields are set to be the login field, in which the same field is used but on different events or arms, then it would mistakenly not save both instances of the field but would only save one. (Ticket #18430)

Version 8.0.1 - (released 11/9/2017)

BUG FIXES & OTHER CHANGES:

  • Minor security fixes: Some Cross-Site Scripting (XSS) vulnerabilities were found in various pages in which a malicious user could potentially exploit them by manipulating the query string of an HTTP request.

  • Bug fix: When copying a project with surveys, the value of the "Allow participants to download a PDF of their responses at end of survey?" survey setting would mistakenly not get copied to the new project. (Ticket #28639)

  • Bug fix: When downloading a PDF of a data entry form with data, in which the user is downloading all forms for all records or all forms for a single record, it would mistakenly not display the locking/e-signature timestamps in the PDF. (Ticket #29915)

  • Bug fix: When downloading a PDF of a survey response with data, on certain occasions it might mistakenly display incorrect survey completion timestamps in the PDF. (Ticket #29930)

  • Bug fix: On the Record Status Dashboard when clicking on the form status stack icon (representing multiple repeating instances of a form or event) in a longitudinal project that has multiple arms, it might mistakenly not display the floating table of instances but instead would display a horizontal black line after clicking the icon. (Ticket #29927)

  • Bug fix: In longitudinal projects using repeating events, the Record Home Page might mistakenly display some form status icons in the wrong column in the table for records that have more than one instance saved of a repeating event. (Ticket #30077)

  • Bug fix: When one or more fields in a matrix contain certain special characters in their field label, it might prevent the "Edit Matrix of Fields" popup from being displayed after clicking the pencil icon on the Online Designer. (Ticket #30250)

  • Bug fix: On certain occasions, rule E in the Data Quality module will mistakenly return discrepancies that have blank/null values, which should never be returned when running rule E. (Ticket #14976, #28576)

  • Bug fix: If a Notes field is using the @READONLY action tag, the "expand" link displayed on the survey or form below the text box would mistakenly not work. (Ticket #30433)

  • Bug fix: If a project is utilizing the randomization module, and the randomization field somehow already has a value saved for it prior to a given record being randomized, then it will now disable that field on the data entry form and prevent the record from being randomized. (Ticket #30427)

  • Bug fix: If a project that has repeating instruments or repeating events is using the Data Resolution Workflow module, and a value is marked as Verified on the first instance of a repeating instrument/event, then if a value is changed on another instance of that instrument or event, respectively, then it would mistakenly De-verify the field on the first instance rather than on the current instance. (Ticket #30457)

  • Bug fix: If a project that has repeating instruments or repeating events is using a Data Quality rule with Real-time Execution enabled, if the DQ rule finds discrepancies when saving a repeating instrument/event, in which the user is not on the first instance, then in the DQ discrepancy popup, it might mistakenly display some data values from the first instance of the instrument/event rather than from the current instance. (Ticket #30477)

  • Bug fixes were addressed in the External Modules framework, such as some modules throwing a PHP error when being enabled, and its TinyMCE rich text editor was upgraded.

  • Bug fix: Fixed typo in "Branching Logic Errors Exist!" popup

Version 8.0.0 - (released 11/3/2017)

NEW FEATURES, BUG FIXES, & OTHER CHANGES:

  • New feature: External Modules

    • External Modules are individual packages of software that can be downloaded and installed by a REDCap administrator. Modules can extend REDCap's current functionality, and can also provide customizations and enhancements for REDCap's existing behavior and appearance at the system level or project level. Modules can utilize REDCap hooks and also can have REDCap plugin pages as part of them.

  • Improvement: On the Public Survey Link page in a project, a new button "Open Public Survey + Logout" has been added to increase security in case users want to open the public survey while ensuring that the participant cannot access their REDCap account in the other browser tab. (Ticket #29686)

  • Bug fix: The font size of any links that were placed in a survey's instructions, field labels, or acknowledgment text would appear too small if the survey was set with "Large" or "Very Large" text size.

  • Bug fix: Fixed typo in Data Import Tool

  • Bug fix: If a user is uploading a Data Dictionary containing a PROMIS CAT (computer adaptive test) survey, in which the CAT contains some multiple choice fields that have duplicate codings, it would mistakenly prevent the user from uploading the Data Dictionary. It should be ignoring duplicate codings in CATs.

  • Bug fix: If a user is uploading a Data Dictionary containing a PROMIS CAT (computer adaptive test) survey and the user modified the Choices column for a CAT field in the Data Dictionary, it would mistakenly accept those changes and allow the Data Dictionary upload to proceed, thus corrupting the CAT's field metadata. This would not affect participants taking the CAT in any way (i.e., the survey would still appear correctly when taking it), but it might cause the CAT not to display correctly when a user views a participant's CAT response on a data entry form afterward.

  • Bug fix: If a user enters data on a repeating instrument but fails to enter a value for a required field, and then the user clicks the "Ignore and go to next form" button in the "Some fields are required" prompt, in which the next form is also a repeating instrument, then it would mistakenly take the user to the next form but on the same instance number that the previous form was on, which may cause some instance numbers to get skipped on the second form. When clicking the "Ignore and go to next form" button, it should always take the user to instance #1 of the next form if the next form is a repeating instrument.

  • Bug fix: Improving compliance with SMTP email servers by added a space after the "Cc:" and "Bcc:" email headers since some SMTP servers might reject emails sent from previous REDCap versions, which had no space in those headers. (Ticket #3943)

  • Bug fix: When editing or adding a calc field in the Online Designer, it would mistakenly still show the results in the section "test calculation with a record" if that option had just been used for another calculated field that was being edited or added previously while on that page, thus mistakenly showing results that do not correspond to the current field being edited/added (Ticket #29682)

  • Bug fix: When opening the Automated Survey Invitation setup popup in the Online Designer, if a particular ASI has been set as "inactive" beforehand, then when the popup opens, it would mistakenly display all the ASI setup options as blank as if it had never been set up before. (Ticket #29765)

  • Bug fix: When using Twilio telephony services for surveys and then opening the "Analyze surveys for SMS & Voice Calls" popup on the Project Setup page, it would incorrectly say that no surveys have been enabled (even though they have) if the user had failed to check at least one of the checkbox options under the "Choose survey invitations types to use" section in the Twilio configuration. (Ticket #18658)

  • Bug fix: When adding/editing the logic for a Data Quality rule, in which the logic contains a "less than" (<) character followed immediately by a function name (e.g., round) - i.e., without a space between the "<" and the function name, then the rest of the logic would get truncated when displaying the logic in the table of Data Quality rules. (Ticket #30088)

Version 7.6.10 - (released 10/25/2017)

BUG FIXES & OTHER CHANGES:

  • Improvement: Emails sent from REDCap now follow a more standardized format by including both HTML text and plain text in each email, thus making emails a bit more likely to be received by their recipients without them getting flagged as spam.

  • Major bug fix: If a user is in REDCap Messenger and using the "Search by person" option in the Search Conversations feature, then after selecting a username to search on, if the user being searched for has a conversation that has the *exact* same title as one of the current user's conversations' titles, then it would return the other user's conversation in the result (and mistakenly allow its messages to be viewed by the current user) even if the current user does not have access to that conversation. This bug is very rare since it requires using the "Search by person" option (as opposed to the "Search by keyword" option) while also requiring that both users have access to a conversation that is different but has the exact same title.

  • Bug fix: Data Resolution Workflow popup dialog might mistakenly appear empty if some comments or logged events contain certain special characters. (Ticket #29391)

  • Bug fix: The Record Home Page would not display some form status icons correctly for repeating instruments in which the first instance of the instrument does not exist - most likely because it was deleted at some point. (Ticket #28821)

  • Bug fix: The tables of repeating instruments displayed at the bottom of the Record Home Page might not display in the correct order.

  • Bug fix: If field labels contain certain special characters, then when creating/modifying a report, the auto-suggest feature when typing variable names in Step 2 or 3 would mistakenly not work. (Ticket #29354)

  • Change: For PDF exports of data entry forms with data, if a field that is normally removed from exports due to users having export rights of "De-Identified" or "Remove all tagged Identifier fields" is being piped into a label, field note, etc. in the PDF file, that field value will no longer be piped in the PDF file but will instead be redacted (i.e., replaced with the text "[*DATA REMOVED*]"). This change is made to increase security/privacy regarding de-identification of data in data exports.

Version 7.6.9 - (released 10/18/2017)

BUG FIXES & OTHER CHANGES:

  • Improvement: Updated the Help & FAQ page with new content.

  • Major bug fix: Automated Survey Invitations would mistakenly not get scheduled for longitudinal projects where the conditional logic contains datediff+today and also contains cross-event logic in which one of the events has no data (i.e., empty event of gray status icons). This same issue would also occur for custom Data Quality rules, in which it would mistakenly not return any discrepancies for records if the rule logic contains datediff+today and also contains cross-event logic in which one of the events has no data. (Ticket #28516)

  • Minor security fix: While REDCap already protects against BREACH attacks by outputting invisible random text of random length onto each web page, it was mistakenly not protected if 302 redirect requests inside REDCap were being analyzed. (This refers to the few scripts in REDCap that serve as a pass-through by outputting an HTTP 302 status code and merely redirect the user to another page.) To prevent BREACH attacks through analysis of REDCap's 302 redirects, it now outputs a new HTTP header with each request, in which the header's value is random text of random length. In this way, even 302 redirect requests will return with a random content-length each time.

  • Bug fix: If a survey queue is set up in a longitudinal project, and then the event-form designations are modified afterward, it might mistakenly display some surveys in the survey queue that should not be displayed. (Ticket #28696)

  • Bug fix: If a report is being sorted by the record ID field in descending order, and the project has record auto-numbering enabled but some of the record names are not numerical (because they were created via a data import or before record auto-numbering was enabled), then the report would fail to order the results correctly. This occurs because the report would falsely assume that all record names were numerical merely because record auto-numbering was enabled, in which case it would try performing a numerical sort, which does not work as expected with non-numerals. REDCap now only attempts to perform a numerical sort of the sort fields if the fields are truly numbers (i.e., have "number" or "integer" validation or are a slider or calc field).

  • Bug fix: The cron job to trigger Automated Survey Invitations that have datediff+today in their conditional logic would stop suddenly if any ASI logic was syntactically incorrect, thus preventing other later ASIs in that same project from getting run. Additionally, the cron job might mistakenly be checking ASIs that had been disabled. (Ticket #28516)

  • Bug fix: A fatal PHP error can occur on every project page if the REDCap web server is running PHP 5.3 or 5.4. This appears to only occur if the External Modules beta version is installed on the REDCap server. (Ticket #28628)

  • Bug fix: For longitudinal projects with multiple arms and with repeating instruments, on the Record Home Page or Record Status Dashboard when clicking on the form status "stack" icon for a repeating instrument with multiple instances saved, it would mistakenly not display the floating popup list of all the instances for that instrument but would instead display an empty box. (Ticket #28970)

  • Bug fix: The Safari browser might mistakenly throw JavaScript errors on survey pages.

Version 7.6.8 - (released 10/10/2017)

BUG FIXES & OTHER CHANGES:

  • Improvement: When a calc field's value is changed, it will now display a red border on the right edge of the calc field's text box to subtly indicate that the displayed value is different from the stored value in the database. And if the calculated value gets changed so that its value matches the stored value again, the red border will disappear. This will help users make note of when calculations have been triggered and if there is any disparity between the displayed value and the stored value.

  • Major bug fix: If a calculated field in a longitudinal project is using cross-event calculations, in which at least one of the fields in the calculation has a prepended event name (e.g., [enrollment_arm_1][field]) while also one of the fields does not have a prepended event name (e.g., [feld]), then even though the calculated value displayed on the form/survey appears correct prior to saving, the field might mistakenly get saved with a blank value when pressing the Save button. This would not be noticeable by the user when entering data but only seen in a report/export or when running Data Quality rule H. Note: This issue does not appear to affect Automated Survey Invitations, calculations performed during data imports, or Data Quality rule H, but it only occurs when saving data on data entry forms and surveys in this very specific scenario described above. To fix this issue after upgrading REDCap, the user can run Data Quality rule H in the project, or an administrator can use the "Find Calculation Errors in Projects" page in the Control Center to find any affected projects.

  • Bug fix: If the PHP memory_limit configuration setting was set in units of "G" (for gigabytes) in the PHP.INI file, it would get interpreted incorrectly when attempting to increase PHP memory allocation.

  • Bug fix: When printing out a survey containing responses where some "enhanced radio buttons and checkboxes" have been selected on the survey, it would be confusing in the printout as to which choice was selected. (Ticket #28111)

  • Bug fix: Project pages would not render correctly due to JavaScript errors occurring on every page if the using Internet Explorer 8. (Ticket #28178)

  • Bug fix: When viewing a read-only survey response on a data entry form (i.e., prior to clicking the "Edit response" button), if a calculated field's value changed when the page loaded, then if the user attempted to close the browser tab or clicked a link to navigate to another page, it would mistakenly prompt them with the "Save your changes?" dialog. It should only prompt them with that dialog if they were in edit mode for that survey response.

  • Bug fix: When the Data History popup for a field on a data entry form, if two events for the field occurred at the same exact time, such as saving data with an auto-calculation event right after, those two events might mistakenly not be displayed in the correct order in the popup.

  • Bug fix: When using Table-based authentication and a user is asked to set up their password recovery question, their email address would not get displayed correctly inside the prompt if their email address contains an apostrophe, in which this would prevent them from fully setting up their recovery question. (Ticket #28439)

  • Bug fix: When a data export takes more time to complete than the set auto-logout time for REDCap, it would mistakenly prevent the data export from completing fully because the "Your REDCap session has expired" dialog would appear on the page even if the user is actively moving their cursor around or clicking on the page, which normally restarts the auto-logout timer to prevent the auto-logout from occurring while a user is still active on a page.

  • Bug fix: When using the Data Resolution Workflow module in a project containing repeating instruments while also using Data Access Groups, some of the charts displayed on the the Resolution Metrics page, specifically "Number of open queries (by data access group)" and "Number of closed queries (by data access group)", would mistakenly display incorrect counts in the chart. This issue was supposed to have been fixed in the previous release but mistakenly was only partially fixed.

  • Bug fix: If the Data Resolution Workflow (DRW) is enabled on a project, and a user has DRW user privileges but does not have Data Quality user privileges, then the "Data Quality" link would mistakenly be displayed on the left-hand menu. (Ticket #28514)

  • Bug fix: When importing data via the Data Import Tool or API import records method, if a variable in the import mistakenly had some uppercase letters when all letters should be lowercase, the error message to the user would omit those uppercase letters when displaying the incorrect variable names to the user, thus making it difficult to understand the error message to learn what is wrong. (Ticket #28293)

Version 7.6.7 - (released 10/2/2017)

BUG FIXES & OTHER CHANGES:

  • Major bug fix: When using the REDCap mobile app to import data for auto-numbered records into a project in REDCap that is on version 7.6.4, 7.6.5, or 7.6.6, under very specific circumstances it might not perform the record-autonumbering correctly during the import process and might mistakenly overwrite an existing record on the server with data from a new record from the mobile app. Upgrading a user's REDCap mobile app to the latest version will prevent this issue, and upgrading REDCap to versin 7.6.7 will also prevent this issue going forward.

  • Bug fix: In a multi-arm longitudinal project using the Scheduling module, in which a record has been scheduled for more than one arm, the "View or Edit Schedule" page's record drop-down list would mistakenly display the record only for a single arm rather than for all arms for which it had been scheduled.

  • Bug fix: When exporting data to a statistical analysis package (i.e., SAS, SPSS, R, Stata), if the project contains Data Access Groups and also Repeating Instruments/Events, it would mistakenly list the DAG field and Repeating Instrument/Instance fields in the wrong order in the stats package's syntax file that gets generated. This would prevent users from loading the data into the stats package. (Ticket #27883)

  • Bug fix: If a user fails to enter data for a required field that exists on a repeating event, then when the required field popup prompt is displayed, if the user clicks the "Ignore and go to next form" button, it would mistakenly redirect them to the first instance of the event rather than to the current instance. (Ticket #27891)

  • Bug fix: When using the Data Resolution Workflow module in a project containing repeating instruments while also using Data Access Groups, some of the charts displayed on the the Resolution Metrics page, specifically "Number of open queries (by data access group)", "Number of closed queries (by data access group)", "Avg time to query resolution (by data access group)", and "Avg time for query response (by data access group)", would mistakenly display incorrect counts in the chart. (Ticket #27888)

  • Bug fix: If a Data Quality rule has been created and is set with the Real Time Execution (RTE) option, the DQ rule would fail to perform RTE on a data entry form if the form exists on repeating event, in which it would mistakenly not report any discrepancies that exist. This only occurs on repeating events but not on repeating instruments (Ticket #27960)

  • Bug fix: If data from a Notes field is being piped into a label of another field, then if the text itself contains line breaks, that text would mistakenly have double line breaks for each single line break when exporting a PDF of the instrument with data. (Ticket #27983)

Version 7.6.6 - (released 9/27/2017)

BUG FIXES & OTHER CHANGES:

  • Major bug fix: When using Automated Survey Invitations in a longitudinal project, under certain conditions ASIs with datediff+today would mistakenly not get evaluated, and thus invitations would not get scheduled/sent. This might have occurred with the second or more invitation for an instrument configured across more than one event between versions 7.4.0 and 7.6.6.

  • Minor security fix: When sending emails of any kind, REDCap now performs an extra validation on the From email address of the email being sent to ensure it is a valid email address, thus preventing any kind of injection by malicious users like those seen in the PHP mail issues CVE-2016-10033 and CVE-2016-10045.

  • Bug fix: When logging into REDCap using a mobile device, the error message would mistakenly not display if an invalid username or password was entered, which could be confusing as to why the login failed. On non-mobile devices, the error message displays properly.

  • Bug fix: When viewing surveys in the Safari browser in which the survey's "Size of survey text" is set to "Large", checkboxes and radio button fields would mistakenly not display correctly and would overlap one another a little.

  • Bug fix: When using the Survey Login on a survey that has the "Save & Return Later" option disabled, it would mistakenly display the "Save & Return Later" at the bottom of the survey page if the participant had just logged in via Survey Login. (Ticket #27389)

  • Bug fix: The Record Home Page and Record Status Dashboard could load unreasonably slowly for projects containing lots of fields, many of which have stored data values. (Ticket #27161)

  • Bug fix: When clicking the "unlock all instruments" link on a multi-arm longitudinal project's left-hand menu while viewing a record belonging to an arm that is not on the first arm, it would mistakenly not unlock all the locked instruments for that record. (Ticket #27740)

  • Bug fix: When piping data into a label, in which the data being piped contains text that looks similar to HTML tags but is not an actual HTML tag (e.g., "hello <123>"), the text inside the <...> would get mistakenly removed from the downloaded PDF file of the data collection instrument with data. (Ticket #27467)

Version 7.6.5 - (released 9/22/2017)

IMPROVEMENTS, BUG FIXES, & OTHER CHANGES:

  • Improvement: Attach PDF of responses in confirmation email - When using the “Send confirmation email” option on the Survey Settings page for a survey, that section now contains an additional option to “Include PDF of completed survey as attachment”, which will add the PDF of their responses sent to the participant in their confirmation email. This new option contains the following warning as a reminder to users: “WARNING: Since email is not considered a secure form of communication, the PDF attachment option is NOT recommended if the survey contains questions asking for identifying information (e.g., PHI).”.

  • Minor security fix: A Blind SQL Injection vulnerability was found on the User Access Dashboard page in which a malicious user could potentially exploit it by manipulating the query string of an HTTP request.

  • Minor security fix: Modified how files get deleted in a project's File Repository so that a POST parameter is used instead of query string parameter, which could subvert Cross-site Request Forgery (CSRF) protection.

  • Bug fix: REDCap Messenger was mistakenly not disabled in public projects (i.e., having no authentication enabled). Because public projects do not utilize REDCap authentication and thus store session information differently than regular projects, REDCap Messenger will be permanently disabled from inside a public project.

  • Bug fix: When the Data Resolution Workflow module is enabled in a project, and a user is viewing the DRW popup that details the history of a data query, if a user that contributed to that data query has since been deleted from the system, then it would display a blank value where their username would be in the popup history. It now says "[User deleted from system]" if the user has been deleted from the system since it is not possible to determine the username of the deleted user for that event. (Ticket #26835)

  • Bug fix: When a respondent is viewing the Stats & Charts after completing a survey, the Download Image button would fail to download an image of the chart. (Ticket #27072)

  • Bug fix: When using the Randomization module in a project and randomizing a record, strata fields that are radio buttons would mistakenly not display correctly in the randomization popup but would have the choice label overlaying the radio button itself. (Ticket #27030)

  • Bug fix: When the text-to-speech feature is enabled on a survey, clicking the speaker icon next to a survey question in order to have it speak the text would mistakenly cause the question choice to become selected/unselected for radio buttons and checkbox fields. (Ticket #27103)

  • Bug fix: When downloading a data dictionary snapshot from the Project Revision History page, if the dictionary contained any UTF-8 encoded characters, then the snapshot might not open correctly in some CSV viewers, such as Microsoft Excel, in which those UTF-8 characters would get mangled and be unreadable, whereas the normal data dictionary download (i.e., non-snapshot CSV) would open correctly and could be viewed normally with no mangling of characters.

  • Bug fix: The data import process (Data Import Tool or API) would mistakenly prevent users from importing a value for a checkbox field that has a negatively valued choice (e.g., "-1"), in which it displays an erroneous error. This appears to only occur in longitudinal projects. (Ticket #16235)

  • Bug fix: When deleting a file for a File Upload field by 1) individually deleting it on a data entry form, 2) deleting the whole data entry form's data via the Delete button at the bottom of the form, or 3) deleting a whole event's data (longitudinal projects only) for a record on the Record Home page, it would mistakenly not remove the file from the REDCap server after 30 days, even though the file appears deleted to the user. All "deleted" files should remain on the server for 30 days, after which they are deleted by a cron job, but in these scenarios, the files would mistakenly stay on the server forever as orphaned from the records to which they were originally attached. (Ticket #27303)


Download 183.44 Kb.

Share with your friends:
  1   2   3   4   5   6   7




The database is protected by copyright ©ua.originaldll.com 2024
send message

    Main page