Chapter 2 Voice Communications Concepts & Technology answers to chapter Review Questions



Download 102.3 Kb.
Date13.06.2017
Size102.3 Kb.
#20316


CHAPTER 2
Voice Communications

Concepts & Technology


ANSWERS TO Chapter Review Questions


  1. The process of how sound waves actually get transferred on and off thevoice network is illustrated in Figure 2-1. The transmitter is a movable diaphragm which is sensitive to changes in voice frequency and amplitude and sends a varying analog, electrical signal out onto the voice network based upon the changes in voice frequency and amplitude. This varying electrical analog wave is transmitted over the voice network to the phone of the receiving person. The receiver or earpiece basically works in the opposite fashion of the mouthpiece. The varying electrical waves are received at the receiver at an electromagnet. Varying levels of electricity produce varying levels of magnetism which cause the movable diaphragm to move in direct proportion with the magnetic variance producing varying sound waves which is what the human ear hears.




  1. DTMF (Dual Tone Multi-Frequency) is is more commonly known as touch tone dialing. The tones generated by DTMF phones can be used for enabling specialized services from PBXs, carriers, banks, information services, and retail establishments.




  1. The differences between the various voice digitization techniques are illustrated in figures
    2-7 and 2-8.




  • PAM (Pulse Amplitude Modulation) varies the amplitude or voltage of the electrical pulses in relation to the varying characteristics of the voice signal.

  • PDM (Pulse Duration Modulation) varies the duration of each electrical pulse in relation to the variances in the analog signal.

  • PPM (Pulse Position Modulation) varies the duration between pulses in relation to variances in the analog signal.

  • PCM (Pulse Code Modulation), including a variation called Adaptive Differential Pulse Code Modulation or ADPCM, transmits a binary representation of either the approximate difference in amplitude of consecutive amplitude samples (ADPCM), or of the absolute amplitude (PCM).




  1. PCM and ADPCM differ in bandwidth based on how the transmitted data is represented. PCM uses 8,000 samples per second with each sample requiring eight bits to represent that sampled bandwidth in binary notation. ADPCM transmits only the approximate difference in amplitude of consecutive amplitude samples, rather than the absolute amplitude. By doing this only 32Kbps as opposed to 64Kbps of PCM are required for each conversation digitized via ADPCM. This allows 48 simultaneous digitized voice conversations per T-1 using ADPCM instead of PCM's 24.




  1. Voice compression is accomplished through the use of Digital Signal Processors (DSPs). DSPs take the digitized PCM code and further manipulate and compress it, are used. Some voice compression techniques attempt to synthesize the human voice, other techniques attempt to predict the actual voice transmission patterns, while still others attempt to transmit only changes in voice patterns.




  1. The business motivation for voice compression is to reduce the bandwidth and associated toll charges required to carry the voice call. It is based around the ability to compress more digitized voice conversations onto less bandwidth, increasing transmission efficiency; however the trade-off is that the quality of compressed voice transmissions does not match the quality of an analog voice transmission over an analog dial-up line or a full 64K of digital line.




  1. The major architectural elements of a PBX include a CPU or Common Control, switching matrix, station cards, trunk card and outside trunks. These elements are graphically represented in figure 2-11.




  1. Voice transmission can be integrated with computers to produce a service know as Computer Telephony Integration (CTI). CTI passes information such as incoming or outgoing phone numbers along the switched connections to or from the attached computer for subsequent processing by the computer or PBX.




  1. Practical business applications of CTI are detailed in figure 2-18. These features can be used in an outbound telemarketing setting, phone numbers can be fed from the computer's database to special auto-dialing equipment which interfaces to the PBX. If the call is answered, the PBX triggers the computer to display the associated data record on the data terminal of the telemarketing agent.




  1. Potential uses for interactive voice response include automated systems to check account balances at banks or to check arrival and departure information at airlines.




  1. The voice network hierarchy is shown in figure 2-4. Functionality implied by the hierarchy is that higher levels on the network hierarchy imply greater switching and transmission capacity as well as greater expense.




  1. Out of band signaling refers to a separate communications channel used to carry inter-switch information for such things as call set-up and termination. The signaling used for intelligent services such as ANI (Automatic Number Identification) does not travel over the same logical channel as the voice conversation itself.




  1. A voice conversation is most likely not carried completely from source to destination via analog means. While the local loop between the local central offices and the destination telephone handsets are likely to be an analog circuit, it is very likely that high-capacity digital circuits will be employed to transport the call between central offices or carriers.




  1. The higher the sampling rate of the analog signal/second the better the digitization and quality of the digital signal.




  1. ADPCM accomphsied digital voice transmission in less than 64 Kbps per second by transmitting only the approximate difference in amplitude of consecutive amplitude samples, rather than the absolute amplitude. Using this technique ADPCM can carry a voice signal using only 32 Kbps of bandwidth.




  1. A DS-0 circuit is considered to be a standard circuit for transmission of a digitized voice signal because it contains exactly 64Kbps, which is just the right bandwidth to carry a digitized voice conversation using PCM (8,000 samples/sec x 8 bits/sample = 64,000 bits/sec).




  1. PCM differs from other voice digitization techniques such as PAM in that it represents the amplitude of the voice signal by using an 8 bit binary code as opposed to an electrical signal.




  1. The main benefit of PCM over the other voice digitization techniques is that PCM sends a numerical representation of the voice. This allows PCM voice signaling to interact with other dgital payloads such as data, image, fax or video.




  1. A CODEC (Coder/Decoder) is the technology employed to sample analog transmissions and transform them into a series of binary digits. Many codecs also multiplex several digitized voice conversations onto a single channel and are an integral part of T-1 multiplexers. A CODEC is basically the opposite of a modem.




  1. Interoperability issues surrounding CTI include three commonly implemented architectures; PBX-to-Host Interfaces, Desktop CTI, and Client/Server CTI. These differ in their implementation and CTI lack of standardization (two major LAN-based CTI API standards are TAPI and TSAPI).




  1. Call Accounting Systems can pay for themselves in a short amount of time by spotting and curtailing abuse as well as by allocating phone usage charges on a departmental basis.




  1. In order to support call accounting the PBX must support SMDR (Station Message Detail Recording). Using SMDR an individual detail record is generated for each call and then fed to the call accounting system and stored on disk.




  1. The main issue surrounding interoperability of PBXs from various vendors is varying proprietary standards. Q.Sig seeks to allow PBXs of any manufacturer to interoperate with each other and with ISDN networks. It is an extension of Q.931 ISDN standard which allows PBX features to interoperate with PSTN features. Another issue is the interoperability of PBXs with wireless phones.




  1. Signaling System Seven (SS7) is the CCITT approved standard for out-of-band signaling. As an underlying architectural component of ISDN, SS7 delivers the out-of-band signaling over ISDN's D channel. SS7 is nothing more than a suite of protocols which controls the structure and transmission of both circuit-related and non-circuit related information via out-of-band signaling between central office switches.




  1. The AIN (Advanced Intelligent Network) is a software defined network that allows SS7 data to be delivered all the way to the customer’s premesis equipment. A software defined network implies that the user has some control over the flexible configuration of their telecommunications service and network. By extending SS7 out-of-band signaling to the end users, voice networks can be reconfigured as business activities dictate.




  1. Network analysts must be qualified to design networks that are capable of carrying voice as well as data so that they can integrate voice and data services. Before designing such networks, it is essential for the network analyst to understand the nature of voice signals, as well as how voice signals can be processed and integrated into a cohesive network with data transmissions.




  1. The bandwidth of the the PSTN is significantly smaller than the bandwidth of human hearing. This is shown graphically in figure 2-2.




  1. A channel bank is a group of 24 CODECS arranged in a modular chassis that digitize analog voice conversations but and load them onto a shared high capacity (T-1:1.544Mbps) circuit.




  1. Toll quality is a term used to denote voice transmission that meets the ITU standard for 32Kbps ADPCM is known as G.721.




  1. The mathematical proof that a T-1 circuit is 1.544 Mbps follows:

8,000 samples/sec x 8 bits/sample = 64,000 bits/sec (bps)

64,000 bits/sec = 64Kbps = DS-0 Circuit

24 DS-0s = 24 x 64Kbps = 1536Kbps = 1.536Mbps


Plus: 1 framing bit/sample x 8,000 samples/sec. = 8,000 framing bits/sec = 8 Kbps
8Kbps (framing bits) + 1536Kbp (voice data) = 1544Kbps = 1.544Mbps = Transmission capacity of a T-1 circuit


  1. A PBX is really just a privately owned, smaller version of the switch in telephone company central offices that can control circuit switching for the general public. Depending on the requested destination, switched circuits are established, maintained and terminated on a per call basis by a portion of the PBX known as the switching matrix.




  1. An important architectural trend in PBX design is that the PBX is becoming nothing more than a specialized communications or voice server that must integrate with all other servers as part of an overall enterprise network. In order to achieve this transparent integration as part of the enterprise network, PBXs have had to undergo a radical change in their overall design from proprietary, monolithic, devices to more open architectures based on industry standard hardware and software components.




  1. With automatic call distribution, incoming calls are routed directly to certain extensions without going through a central switchboard. Calls can be routed according to the incoming trunk or phone number. ACD is often used in customer service organizations in which calls may be distributed to the first available agent




  1. The three major CTI architectures are: PBX-to-Host Interfaces, Desktop CTI, and Client/Server CTI. They are fully differentiation in figure 2-19.




  1. Predictive Dialing is a merger of computing and telephony. Using a database of phone numbers, it automatically dials those numbers, recognizes when calls are answered by people, and quickly passes those calls to available agents.




  1. The universal in-box, or unified messaging, is perhaps the most interesting CTI application category for the LAN-based user. It allows voice mail, e-mail, faxes, and pager messages to all be displayed on a single graphical screen. Messages can then be forwarded, deleted, or replied to easily in point and click fashion. Waiting calls can also be displayed in the same Universal In-Box.




  1. Following are some key characteristics of CTI application development tools:

  • Graphical code generators allow easy application development with a minimum of programming background.

  • Debugging tools, also known as test utilities or virtual phone utilities, allow applications to be tested without the need for voice cards or phones. Log files that record all user responses and program interactions can also aid in debugging new programs.

  • Interfaces to FAX software for incoming or outbound FAX control can add FaxBack or FAX-on-Demand capabilities

  • Sound editors are able to edit and translate between .WAV and .VOX sound files

  • Pre-recorded sound bites with standard greetings and responses can lend a professional image to developed CTI applications

  • CTI applications developed with a given CTI application development tool may or may not need to pay royalties on copies of the finished application

  • Among the types of CTI applications that can be developed with such application development tools are: voice mail, interactive voice response, inbound/outbound fax-on-demand, and call center CTI.




  1. The key functions of a CTI voice card are as follows:

  • Record and playback digitized video

  • Create and recognize DTMF tones (Dual Tone Multiple Frequency)

  • Answer and place phone calls

  • Recognize and process incoming Caller ID (Automatic Number Identification) information




  1. A Tandem Office is a is a special central office that connects long distance calls within a given LATA. Local calls come into the local central office via a local loop and travel to their local destination via a local loop. Calls which are not local but still within the same LATA are known as intra-LATA calls and are handled by a local carrier, most often an RBOC's operating company. Technically, these are long distance calls and a local CO may not have a direct trunk to the destination CO. In this case, the call is routed through a tandem office that establishes the intra-LATA circuit and also handles billing procedures for the long distance call.




  1. Required client hardware and software technology for IP-based voice transmission includes the following:

  • Client software for IP-based voice transmission

  • PC workstation with sufficiently fast CPU to digitize and compress the analog voice signal

  • Sound card for local playback of received voice transmission

  • Microphone for local input of transmitted voice signals and Speakers for local output of received voice signals




  1. Important features of VOIP client software are detailed in Figure 2-23.




  1. Voice compression is directly related to bandwidth requirements and delay. Although VOIP transmission quality has improved thanks to improved voice compression algorithms, the fact remains that shared IP networks were designed to carry data that could tolerate delays. Voice networks are designed with dedicated circuits offering guaranteed bandwidth and delivery times to voice transmissions. Depending on the particular CODEC algorithm used, voice compression can cause a major difference in required bandwidth .




  1. The key characteristic of frame relay that must be overcom is variable length frames. To dynamically adapt in order to transmit data as efficiently as possible, frame relay encapsulates segments of a data transfer session into variable length frames. For longer data transfers, longer frames with larger data payloads are used and for short messages, shorter frames are used. These variable length frames introduce varying amounts of delay due to processing by intermediate switches on the frame relay network. This variable length delay introduced by the variable length frames works very well for data but is unacceptable to voice payloads that are very sensitive to delay.




  1. There are several issues surrounding Voice over ATM. Specifically, increased ATM network capacity for voice transmission efficiency can be achieved in one of the following ways:

  • Voice compression - The ITU standardized voice compression algorithms via the G series of standards. Algorithms vary in the amount of bandwidth required to transmit toll quality voice. (G.726: 48, 32, 24, or 16Kbps; G.728: 16Kbps; G.729: 8Kbps). An important point to remember with voice compression is that the greater the compression ratio achieved, the more complicated and processing intensive the compression process. In such cases , the greatest delay is introduced by the voice compression algorithm with the highest compression ratio, requiring the least bandwidth.

  • Silence suppression - All cells are examined as to contents. Any voice cell that contains silence is not allowed to enter the ATM network. At the destination end, the non-transmitted silence is replaced with synthesized background noise. Silence suppression can reduce the amount of cells transmitted for a given voice conversation by 50%.

  • Use of VBR (Variable Bit Rate) rather than CBR - By combining the positive attributes of voice compression and silence suppression, ATM-based voice conversations are able to be transmitted using variable bit rate bandwidth management. By only using bandwidth when someone is talking, remaining bandwidth is available for data transmission or other voice conversations.




  1. ASVD - Analog Simultaneous Voice & Data does not transmit voice and data in a truly simultaneous manner. Instead, it switches quickly between voice and data transmission. Voice transmission always takes priority, so data transfers are paused during voice transmissions. ASVD has been formalized as ITU standard V.61 and is incorporated into VoiceView software from Radish Communications Systems that is included in Windows 95. DSVD- Digital Simultaneous Voice & Data digitizes all voice transmissions and combines the digitized voice and data over the single analog transmission line. The digitized voice is compressed into between 9.6K and 12Kbps leaving between 16.8Kbps and 19.2Kbps for data out of the total 28.8Kbps transmission rate of a V.34 DSVD compliant modem. Such modems are currently available from Boca Research and U.S. Robotics. The DSVD standard has been formalized as ITU V.70.




  1. ISDN varies from DSVD in that ISDN is a digital communications technology consisting of two separate communications channels. Using ISDN two calls are placed: one for the data and a second for the voice call. In addition to is basic architectural difference ISDN is not nearly as available as switched analog voice phone service. In addition, pricing policies for ISDN can include both a monthly flat fee as well as an additional usage based tariff.




  1. The difference between CBR and VBR is the manner in which bandwidth is reserved for the virtual voice circuit. Voice is currently transmitted across ATM networks using a bandwidth reservation scheme known as CBR or Constant Bit Rate which is analogous to a Frame Relay virtual circuit. However, constant bit rate does not make optimal use of available bandwidth since during the course of a given voice conversation, moments of silence intermingle with periods of conversation. By combining the positive attributes of voice compression and silence suppression, ATM-based voice conversations are able to be transmitted using variable bit rate bandwidth management. By only using bandwidth when someone is talking, remaining bandwidth is available for data transmission or other voice conversations.




  1. Peak Voice Bit Rate and Guaranteed Voice Bit Rate are parameters associated with VBT ATM communication. Peak Voice Bit Rate controls the maximum amount of bandwidth a voice conversation can be given when there is little or no contention for bandwidth. Guaranteed Voice Bit Rate controls the minimum amount of bandwidth that must be available to a voice conversation regardless of how much contention exists for bandwidth.




  1. A FRAD assists in optimizing voice transmission over frame relay by reserving bandwidth for the transmissionl. Voice conversations transmitted over Frame Relay networks require 4-16 Kbps of bandwidth each. This dedicated bandwidth is reserved as a end-to-end connection through the frame relay network known as a PVC or permanent virtual circuit. In order for prioritization schemes established by FRADs to be maintained throughout a voice conversation’s end-to-end journey, intermediate frame relay switches within the frame relay network must support the same prioritization schemes. At this point, voice conversations can only take place between locations connected directly to a frame relay network. There are currently no interoperability standards or network-network interface standards defined between frame relay networks and the voice-based PSTN.

TEST QUESTIONS
True/False Questions


    1. POTS uses two guardbands to prevent interference from adjacent frequencies from interfering with the voice signal. T/35




    1. There are two approaches to resolve the phone number shortage: geographically adding area codes and overlaying area codes. T/40




    1. Although the local loop between the local CO and a residence or place of business may be an analog circuit, it is highly unlikely that the continuously varying analog signal representing a person's voice will stay in analog form all the way to the destination location's phone receiver. T/37




    1. Regardless of the voice compression technique or circuit-loading technique employed, the quality of compressed voice transmissions easily matches the quality of an analog voice transmission over an analog dial-up line. F/47




    1. In order to increase the capacity of connections to the outside network, cards known as station cards are added to a PBX. F/49




    1. A PBX feature known as call pickup allows a user to answer another user’s phone without the need to actually forward the call. T/50




    1. Call accounting systems can pay for themselves in a short amount of time by spotting and curtailing abuse as well as by allocating phone usage charges on a departmental basis. T/50




    1. The voice response unit is a LAN-based server that stores, processes and delivers voice messages. F/58




    1. The CTI application known as automated attendant, allows callers to direct calls to a desired individual at a given business without necessarily knowing their extension number. T/58




    1. Client/server CTI, also known as first party call control, is much less expensive than desktop CTI as well as being a simpler alternative to desktop CTI. F/58




    1. VOIP conversations typically suffer from more latency than PSTN conversations. T/61




    1. A major problem with voice conversations transmitted over Frame Relay networks are their inability to reserve the necessary end-to-end bandwidth. F/65




    1. ATM is a switch-based WAN service using variable length cells to transmit voice, assuring fixed processing times enabling predictable delay and delivery time. F/66


Multiple Choice Questions
1. 1. This portion of a telephone handset contains a mouthpiece with a movable diaphragm helping to convert sound waves into analog waves.

a. receiver

p.34 b. transmitter

c. modem


d. codec
2. Which portion of a telephone handset contains an earpiece with a movable diaphragm which helps convert analog waves back into sound waves?

p.34 a. receiver

b. transmitter

c. modem


d. codec
3. The bandwidth available for analog voice transmission is

a. 0-300 Hz

p.35 b. 300-3100 Hz

c. 3100-3400 Hz

d. 0-4000 Hz
4. What is the process in which constantly varying analog voice conversation must be sampled frequently enough so that when the digitized version of the voice is converted back to an analog signal, the resultant conversation resembles the voice of the call initiator?

a. modulation

b. voice analysis

p.44 c. voice digitization

d. none of the above
5. Most voice digitization techniques employ a sampling rate of

a. 1000 samples per second

b. 2000 samples per second

c. 4000 samples per second

p.44 d. 8000 samples per second
6. Converting analog waves into digital signals by varying the amplitude or voltage of the electrical pulses in relation to the varying characteristics of the voice signal is known as

a. PPM


p.44 b. PAM

c. PDM


d. PCM
7. Converting analog waves into digital signals by varying the duration of each electrical pulse in relation to the variances in the analog signal is known as

a. PPM


b. PAM

p.44 c. PDM

d. PCM
8. Converting analog waves into digital signals by varying the duration between pulses in relation to the pulse position in the analog signal is known as

p.44 a. PPM

b. PAM

c. PDM


d. PCM
9. The most common method used for voice digitization today is

a. PPM


b. PAM

c. PDM


p.44 d. PCM
10. Using PCM to digitize voice results in a bandwidth requirement of 64Kbps for one conversation. What circuit works just right for this requirement?

p.45 a. DS-0

b. DS-1

c. T-1


d. T-2
11. This type of voice digitization transmits only the approximate difference in amplitude of consecutive amplitude samples and results in 48 simultaneous digitized voice conversations per T-1.

p.47 a. ADPCM

b. PAM

c. PDM


d. PCM
12. A privately owned, smaller version of the switched central offices which can control circuit switching for the general public is known as a

a. POP


b. CO

c. LATA


p.48 d. PBX
13. Phone lines to users' offices for phone connection are terminated in the PBX in slide-in modules or cards known as

a. RJ-11 cards

p.49 b. station cards

c. trunk cards

d. common control CPUs
14. In a PBX, these types of cards allow connections to the outside network and may be specialized to a particular type of network line such as a T-1 or DDS line.

a. RJ-11 cards

b. station cards

p.49 c. trunk cards

d. common control CPUs
15. Which of the following is a voice-based PBX feature in which the PBX chooses the most economical path for any given call?

a. call pickup

b. automatic call distribution

c. hunting

p.50 d. LCR
16. Which of the following is a voice-based PBX service which allows calls to bypass the central switchboard and go directly to a user's phone?

p.50 a. direct inward dialing

b. hunting

c. prioritization

d. call pickup
17. This control and monitoring feature is special software which can provide special reports, sorted billing statements, and exception reports which will spot possible abuses of the PBX.

a. T-1 support

p.50 b. call accounting system

c. automated attendant

d. ISDN support
18. Rather than having an operator answer all calls, this type of PBX auxiliary voice-related service uses a voice processor which first answers and requests callers to press the extension number they wish to reach.

a. voice mail

b. voice out

c. ads on hold

p.58 d. automated attendant
19. This type of PBX auxiliary voice-related service allows messages to be recorded for someone and may even allow forwarding, copying, adding comments to the message, saving and recalling the message.

p.60 a. voice mail

b. voice processor

c. ads on hold

d. automated attendant
20. This important and recent PBX trend uses the CT2 common air interface global standard.

a. multivendor interoperability

b. single user data integration

p.55 c. PBX integration with wireless phones

d. none of the above.
21. Calls which are not local but still within the same LATA are known as

a. inter-LATA calls

b. CO calls

c. POP calls

p.36 d. intra-LATA calls
22. These calls must be turned over from a local carrier to a long-distance carrier.

p.36 a. inter-LATA calls

b. CO calls

c. POP calls

d. intra-LATA calls
23. A long distance switching office, also called a class 4 toll center, is most commonly known as a

p.37 a. POP

b. CO

c. LATA


d. PBX
24. A key requirement to the delivery of intelligent services such as ANI would be

a. inter-switch signaling methodology must be standardized

b. the signal must not travel over the same logical channel as the voice conversation

c. there must be end-to-end signaling between carrier's switches and CPE

p.42 d. all of the above are key requirements
25. A suite of protocols which controls the structure and transmission of both circuit-related and noncircuit-related information via out-of-band signaling between central office switches is known as

p.42 a. SS7

b. TCP/IP

c. IPX/SPX

d. SST
26. Software-defined network (SDN), a major component of the advanced intelligent network, provides flexible configuration of a user's telecommunications service and network. The most common example of SDN is

a. TCP/IP

b. PBX

p.43 c. customer controlled 800 services



d. customer billing
27. Which signaling system 7 protocol is used at the OSI network layer?

a. O&MAP (Operations Maintenance Application Part)

b. TCAP (Transaction Capabilities Application Part)

p.43 c. SCCP (Signaling Connection Control Part)

d. none of the above
28. This technology seeks to integrate the two most common productivity devices, the computer and the telephone.

a. ISDN


p.56 b. CTI

c. PSTN


d. PCS
29. A sub-category of CTI, this application delivers audio information to callers based on responses on the touch-tone keypad to pre-recorded questions.

a. outbound dialing

b. automated attendant

c. automated call distribution

p.57 d. audiotex
30. This sub-category of CTI uses a database of phone numbers, automatically dials those numbers, recognizes when calls are answered by people, and quickly passes those calls to available agents.

p.59 a. outbound dialing

b. automated attendant

c. automated call distribution

d. audiotex
31. This standard provides for interoperability among client software for low bandwidth voice and video for some client IP-based voice transmission software.

p.63 a. ITU H.323

b. T.120

c. RSVP


d. GSM
32. The main problem with VOIP transmissions is currently:

a. bandwidth

p.61 b. latency

c. framing bits

d. variable frame size
33. Which of the following is a wide area voice transmission service initially deployed for data which encapsulates segments into variable length frames with variable length delay?

a. ATM


b. IP-based voice transmission

c. POTS


p.65 d. Frame Relay
34. Which of the following is a technique used by a FRAD for accommodating voice and data traffic?

a. voice prioritization

b. data frame size limitation

c. separate voice and data queues

p.65 d. all of the above can be used
35. This technique of optimizing voice over ATM by only using bandwidth when someone is talking is known as

p.67 a. VBR

b. CBR

c. voice compression



d. silence suppression
36. Which one of the following transmits voice and data by quickly switching between analog voice and data transmission?

a. VBR


b. ISDN

p.69 c. ASVD

d. DSVD
37. Which of the following transmits voice and data simultaneously over a single analog transmission line by putting compressed digitized voice between 9.6Kbps and 12Kbps, and data between 16.8Kbps and 19.2Kbps?

a. VBR


b. ISDN

c. ASVD


p.69 d. DSVD
38. Of the following, which transmits simultaneous switched digital voice and data over a digital transmission line?

a. VBR


p.69 b. ISDN

c. ASVD


d. DSVD
39. Area codes traditionally had what number(s) as the center digit?

a. 0


b. 1

c. 2


p.39 d. A & B

Fill-In the Blank Questions


    1. POTS uses a bandwidth of 4000Hz including two __________ to prevent interference from adjacent frequencies interfering with the voice signal.




    1. Specially programmed microprocessors known as __________, take the digitized PCM code and further manipulate and compress it.




    1. This device, known as a(n) __________, is the technology used to sample analog transmissions and transform them into a stream of binary digits.




    1. Depending on the requested destination, switch circuits are established, maintained and terminated on a per call basis by a portion of the PBX known as the switching __________.




    1. A LAN-based server that stores, processes and delivers digitized voice messages is called a(n) __________ server.




    1. The __________ market has pushed the need for mini-PBXs for professionals working out of small or home offices.




    1. The worldwide, CCITT-approved standard for out-of-band signaling is known as __________.




    1. __________ seeks to integrate the two most common productivity devices, the computer and the telephone, to enable increased productivity not otherwise possible by using the two devices in a non-integrated fashion.




    1. __________ will allow voice mail, email, faxes, and pager messages to all be displayed on a single graphical screen.




    1. Touch-tone dialing is technically known as __________ because the tone associated with each number dialed is really a combination of two tones selected from a matrix of multiple possible frequencies.




    1. A key requirement to inter-switch signaling methodology is that the signal must travel out of the voice conversation's band or channel in a process known as __________.




    1. A wide area transmission device originally used for data transmission, a(n) __________ is able to accommodate both voice and data traffic by employing voice prioritization, data frame size limitation, and/or separate voice and data queues.


Answers


    1. guardbands p.35

    2. digital signal processors p.47

    3. CODEC p.45

    4. matrix p.48

    5. voice p.53

    6. SOHO p.56

    7. signaling system 7 (SS7) p.42

    8. CTI p.56

    9. Universal In-box or Unified Messaging p.56

    10. DTMF p.61

    11. out-of-band signaling p.42

    12. FRAD or Frame Relay Access Device p.65


CASE STUDY AND ANSWERS
BLOOMBERG GOES IP

Activities


1. Top-down model:
Business Reduced operating cost
Availability of commercial rather than custom hardware
Interoperability with existing Internet technologies and content
Applications Delivery of breaking financial information to baniks, brokerages, and other financial institutions
Data Financial information
Company background
Breaking news
Network Private network of 120 thousand terminals
Internet connectivity
Technology Frame Relay
TCP/IP
Nortel routers
NEC SOCKS servers
HP Openview for network management
2. Unanswered questions:
How much data is carried?
What other communications technologies are used besides frame relay?

What VOIP technologies are planned for use?


Business


    1. The business motive for this case study was twofold. Bloomberg wanted to gain access to the rich resources of the web for their customers and the wanted to get out of the custom hardware business.

    2. To use standardized hardware and allow the integratin of Internet technologies and content into their service.

    3. The case does not clearly state if metrics were identified. Suitable metrics include system response time.

    4. All of their customers.

Application





    1. Custom financial data and news delivered to financial institutions.

    2. Realistically the are. The Bloomberg service now includes access to Internet content as well as their traditional information.

    3. VOIP, video conferencing, etc.

    4. HP Openview



Data





    1. Financial information such as stock and commodities pricing, interest rates, and breaking news along with otherweb based information.

    2. Streaming media and VOIP.



Network





    1. Frame Relay

    2. TCP/IP

    3. Standard hardware rather than custom built components



Technology





    1. Frame Relay links, NEC SOCKS servers for use with corporate firewalls, and Nortel routers.


This page intentionally left blank



Download 102.3 Kb.

Share with your friends:




The database is protected by copyright ©ua.originaldll.com 2024
send message

    Main page